3M - Aerion Technologies - Macurco
and AIM
Gas
Detection Equipment
FMW Distributors is proud to be a distributor for
3M's AIM
and
Aerion-Macurco product
lines. To order
AIM
and
Aerion-Macurco gas detection
equipment,
or
to get pricing, please
phone 936-582-4616
or fax
POs and RFQs
to 936-448-4699.
FMW Distributors only sells
to other businesses, government agencies and general contractors.
Unfortunately, we do not sell to the general public and cannot drop ship
orders to residential addresses, except for orders placed by general
contractors. If
shipment is made to a general contractor's residential address, a resale
certificate must be faxed prior to placing an order.
Aerion-Macurco proves that
carbon monoxide safety can be easy
and beautiful.
FMW Distributors offers
Aerion-Macurco's
full line of high quality gas detection equipment, including its stylish new
CM-S1
carbon monoxide detector.
Designed for residential and commercial use, the
Aerion-Macurco CM-S1 delivers
unparalleled ease of installation with a simple three-step Speed Mount™ system
and compatibility with both
12-volt security systems and 24-volt fire alarm systems.
|
Model CM-S1
Carbon Monoxide Detector
|
-
SPDT alarm relay to connect to alarm control
panels or switch external alarms.
-
LED for operating status
-
12-24 VDC Power
-
Flush or surface mount
-
Long life sensor
-
All units individually calibrated
-
Small, low profile, attractive unit in a white
plastic case.
-
Detector alarms at multiple levels of exposure
to carbon monoxide based on time weighted averages of the gas present.
-
Inexpensive, easy to install.
-
Microcomputer control allows mostly automatic
operation.
-
Test & Reset switch conducts internal tests and
actuates alarm relay.
-
Solid state sensor. No maintenance or periodic
sensor replacement needed.
-
Buzzer: Produces repeating loud tone bursts
during alarm, and chirps if sensor trouble is found.
|
To get pricing on all
Aerion-Macurco
carbon monoxide, ammonia, air
quality, heating gas, hydrogen,
nitrogen dioxide and
refrigerant detectors,
phone 936-582-4616, or
fax RFQs to
936-448-4699.
AIM Portable Gas Detectors
Take workplace safety to new heights with the
Pilot by
AIM, the
finest value
in portable multi-gas detectors, featuring the power of the Instant Ready™,
pre-calibrated sensor pack at an attractive
low cost.
|
M/N 955-100-400
M/N 955-100-300
Pilot Multi-Gas Detector
|
-
Large LCD display with designated line for each
sensor reading
-
Standard – rechargeable Li-Ion battery; Optional
– Alkaline (AAA batteries)
-
Operating time of up to 18 hours (Li-lon
battery)
-
Peaks, STEL, TWA, Instantaneous Gas Levels
readings
-
Dimensions of 4.8" x 2.7" x 1.4"
-
Sensors - Combustible (catalytic bead); Oxygen
and Toxics (electrochemical)
-
Weighs 10.4 ounces (292 g)
-
LED: high = Red indicator, audible alarm of 95
dB @ 1 ft.
-
-4°F to 122°F (-20°C to 50°C) operating
temperature
-
0 to 99% operating humidity
-
Intrinsically safe Class 1, Division 1, Groups
A, B, C and D; T3 C22.2 NO 152 CSA approval
-
1.2 MB (6 months of data at 1 minute intervals
per 40 hours/week) data logging memory
-
Standard vibrator
-
Designed to meet IP65 (protected against dust
and water)
-
Immune to 450 MHz, 5 watt walkie-talkie
transmission from distance of 12 inches
-
2-year warranty on hardware, 18-month warranty
on sensor pack
-
Sensor Pack Life expectancy of 20-months
|
To get pricing on all
AIM
portable gas detectors,
fixed gas detectors and
environmental monitors,
phone 936-582-4616, or
fax RFQs to
936-448-4699.
To order
AIM
and
Aerion-Macurco gas detection
equipment, or
to get pricing, phone 936-582-4616
or fax
POs and RFQs
to 936-448-4699.
Requests For Quotes
RFQs may
be faxed to 936-448-4699.
Quotes will be responded to within 24 hours.
If
you have an emergency RFQ, please phone 936-582-4616.
RETURN
TO TOP
|
